Haltech F10 Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
13
and which gives access to the coolant stream. The sensor should be mounted after the engine
and before the thermostat in the coolant circuit. Since most engines have existing temperature
sensor holes, it is often possible to mount the Haltech sensor in one of these holes. A thread
adapter is sometimes necessary. In some engines only one temperature sensor hole exists and
is used for the dashboard gauge sender. It is usually possible to install a tee-piece to allow
both the dashboard sender and the Haltech sender to share access to the same threaded hole.
If it is necessary to drain the coolant from the vehicle to fit the temperature sensor then the
factory manual for the engine should be consulted for the correct procedure to restore the
coolant and purge the cooling system of air.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Comentarios a estos manuales

FrankRib 14 May 2024 | 06:56:21

Elevating decks in mountainous areas through the careful integration of planters and lively greenery introduces a invigorating touch of nature to living in the mountains. Engaging in talks about the individual types of plants that flourish in mountainous settings, investigating suitable planter options, and considering design aspects provide useful guidance for individuals looking for to create green and welcoming outdoor spaces. Through the exchanged experiences of forum members, taking into ac